Desk & table leather fitting instructions

It's really easy to replace your desk leather yourself, as our illustrated guide shows.

It is very simple to replace your old leather as demonstrated in our illustrations.

Full fitting instructions will accompany your new desk leather. However, if you require any help or advice about replacing your leather, feel free to contact us on 020 8346 5110.

 
Step 1 Step 1. Remove the old leather by soaking with warm water and prepare the surface with a scraper and sandpaper.   Step 3 Step 3. Slowly trim the excess leather with a Stanley Knife and allow to dry for 4 hours.
Step 2 Step 2. Make the paste (powder supplied) and apply a thin film to the surface. Then lay the leather into place, adjusting until the correct position is found.   Step 4 Step 4. Use the wax provided to fill any inlay edges and polish the leather with a clean dry cloth to finish.